Loading Documents; How To Load Documents; Using The Automatic Document Feeder (Adf) - Brother MFC-7240 Basic User's Manual

3

Loading documents

How to load
documents
You can send a fax, make copies and scan
from the ADF (Automatic Document Feeder).
Note
The scan feature is available for FAX-
2950, MFC-7240 and MFC-7290.
Using the automatic
document feeder (ADF)
The ADF can hold up to 20 pages and feeds
each sheet individually. Use standard 80 gsm
paper and always fan the pages before
putting them in the ADF.
Document Sizes Supported
Length: 147.3 to 355.6 mm
Width: 147.3 to 215.9 mm
Weight:
64 to 90 gsm
Important
• DO NOT use paper that is curled,
wrinkled, folded, ripped, stapled, paper-
clipped, glued or taped.
• DO NOT use cardboard, newspaper or
fabric with the ADF.
• To avoid damaging your machine while
using the ADF, DO NOT pull on the
document while it is feeding.
Note
Make sure documents with correction fluid
or written with ink are completely dry.

How to load documents

a
Unfold the ADF document support (1)
3
and the ADF document output support
flap (2).
2
3
b
Fan the pages well.
c
Stagger the pages of your document
face down top edge first, in the ADF until
3
the LCD display message changes and
you feel it touch the feed rollers.
1
d
Adjust the paper guides (1) to fit the
width of your document.
Important
To avoid damaging your machine while
using the ADF, DO NOT pull on the
document while it is feeding.
3
3
3
1
23