Network I/F
You can choose the network connection type, wired network connection or wireless network connection. If
you want to use the wired network connection, select Wired LAN, and if you want to use the wireless network
connection, select WLAN. You can only have one network connection type active at a time.
a
Press Menu.
b
Press a or b to select LAN.
Press OK.
c
Press a or b to select Network I/F.
Press OK.
d
Press a or b to select Wired LAN or WLAN.
Press OK.
e
Press Stop/Exit.
Printing the Network Configuration List
Note
Node Name: Node Name appears in the Network Configuration List. The default Node Name is
"BRNxxxxxxxxxxxx" for a wired network or "BRWxxxxxxxxxxxx" for a wireless network ("xxxxxxxxxxxx" is
your machine's Ethernet address).
The Network Configuration List prints a report listing all the current network configuration including the
network print server settings.
a
Press Menu.
b
Press a or b to select Print Reports.
Press OK.
c
Press a or b to select Network Config.
Press OK.
d
Press Mono Start or Colour Start.
Control panel setup
6
6
6
89