Super Energy Saving Settings - LG D2342P Owner's Manual

SUPER ENERGY SAVING settings
1
Press any button on the front of the Monitor set to
display the MONITOR SETUP OSD menu.
2
Press the MENU button to display the options in the
OSD menu.
3
Select SUPER ENERGY SAVING by pressing the
buttons on the front of the Monitor set and set the
options.
4
Select EXIT to leave the OSD menu.
To return to the upper menu or set other menu items,
use the up arrow ( ) button
The available picture settings are described in the following:
Menu
ON Enables SUPER ENERGY SAVING; you can save energy with this energy-efficient function.
OFF Disables SUPER ENERGY SAVING.
RESET Resets the values of total energy consumption reduction and CO2 emission reduction.
NOTE
TOTAL POWER REDUCTION: How much power is saved during using the monitor.
y y
TOTAL CO2 REDUCTION: Change the TOTAL POWER REDUCTION to CO2.
y y
SAVING DATA(W/h)
y y
SUPER SAVING
LED SAVING
Saving Data depends on the Panel. So,those values should be different from each panel and
y y
panel vendor.
LG accumulate those values using integrated function with 10 minutes "broadcast video
y y
signal".
LED Saving means that how much power can be saved using WLED Panel instead of CCFL
y y
panel.
SUPER Saving means that how much power can be more saved using SUPER ENERGY
y y
SAVING function.
584 mm (23 inch)
5
12
CUSTOMIZING SETTINGS
SUPER ENERGY SAVING
ON
SUPER
SAVING TOTAL POWER REDUCTION:
: 5 W/h
LED
TOTAL CO2 REDUCTION:
SAVING
: 12 W/h
Description
15
OFF RESET
20 W
16 g
OK EXIT