Super Energy Saving Settings - LG E2051S Owner's Manual

SUPER ENERGY SAVING Settings

1
Press any button on the front of the Monitor to display
the MONITOR SETUP OSD menu.
2
Press the MENU button to display the options in the
OSD Menu.
3
Select SUPER ENERGY SAVING by pressing the
▼ button.
4
Enter to SUPER ENERGY SAVING by pressing the
► button.
5
Set the options by pressing ◄ or ► buttons.
6
Select EXIT to leave the OSD menu.
To return to the upper menu or set other menu items,
use the up arrow ( ) button.
The available SUPER ENERGY SAVING settings are described below.
Menu
ON Enables SUPER ENERGY SAVING.
OFF Disables SUPER ENERGY SAVING.
RESET Resets the values of total energy consumption reduction and CO2 emission reduction estimates.
NOTE
TOTAL POWER REDUCTION: How much power is saved while using the monitor.
y
TOTAL CO2 REDUCTION: Estimated CO2 not used by activating the Super Energy Saving function.
y
SAVING DATA(W/h)
y
SUPER SAVING
LED SAVING
Saving Data depends on the Panel. So,those values should be different from each panel and panel
y
vendor.
LG calculated these values by using "broadcast video signal".
y
LED Saving means how much power can be saved using a WLED Panel instead of CCFL panel.
y
SUPER SAVING means how much power can be saved using the SUPER ENERGY SAVING
y
function.
470 mm (18.5 inch) 508 mm (20 inch)
3 W/h 3 W/h
3 W/h 18 W/h
CUSTOMIZING SETTINGS
SUPER ENERGY SAVING
ON
SUPER
SAVING TOTAL POWER REDUCTION:
: 5 W/h
TOTAL CO2 REDUCTION:
LED SAVING
: 12 W/h
Description
546 mm (21.5 inch) 584 mm (23 inch)
4 W/h
15 W/h
15
OFF RESET
20 W
16 g
OK EXIT
5 W/h
12 W/h