LG D2342P Owner's Manual page 5

Button
MENU
3D
AUTO
VOLUME (Only HDMI mode) Adjust the volume of the Monitor set.(See p.14)
INPUT
EXIT
(Power Button)
Accesses the main menus.(See p.13)
OSD LOCKED/ This function allows you to lock the current control settings, so
UNLOCKED that they cannot be inadvertently changed.
Press and hold the MENU button for several seconds.
The message "OSD LOCKED" should appear.
You can unlock the OSD controls at any time by pushing
the MENU button for several seconds. The message "OSD
UNLOCKED" should appear.
SUPER ENERGY Use this button to enter SUPER ENERGY SAVING menu.For
SAVING Button more information.(See p.15)
3D display settings.(See p.14)
When adjusting your display settings, always press the AUTO button on the MONITOR
SETUP OSD. (Only Analog Mode)
If you want the best screen, set to the resolution of the below.
The best display mode 1920 x 1080
You can choose the input signal.
y When two input signals are connected, you can select the input signal (D-SUB/DVI/
HDMI) you want.
y When only one signal is connected, it is automatically detected. The default setting is
D-SUB.
Exit the OSD(On Screen Display).
Turns the power on or off.
Power Indicator The power indicator stays blue if the display is running
properly (On Mode). If the display is in Sleep Mode , the
power indicator is blinking blue.
ASSEMBLING AND PREPARING
Description
5