Super Energy Saving Settings - LG D2000N Owner's Manual

16
CUSTOMIZING SETTINGS
SUPER ENERGY SAVING Settings
1
Press any button on the front of the Monitor set to
display the MONITOR SETUP OSD menu.
2
Press the MENU button to display the options in the
OSD menu.
3
Select SUPER ENERGY SAVING by pressing the
buttons on the front of the Monitor set and set the
options.
4
Select EXIT to leave the OSD menu.
To return to the upper menu or set other menu items,
use the up arrow ( ) button.
The SUPER ENERGY SAVING picture settings are described below.
Menu
ON Enables SUPER ENERGY SAVING you can save energy with this energy-efficient function.
OFF Disables SUPER ENERGY SAVING.
RESET Resets the values of total energy consumption reduction and CO2 emission reduction estimates.
NOTE
TOTAL POWER REDUCTION: How much power is saved while using the monitor.
y y
TOTAL CO2 REDUCTION: How much CO2 was saved by reducing the power.
y y
SAVING DATA(W/h)
y y
SUPER SAVING
LED SAVING
Saving Data depends on the Panel. So,those values should be different from each panel and panel
y y
vendor.
LG calculated these values by using "broadcast video signal".
y y
LED Saving refers to how much power can be saved using a WLED Panel instead of CCFL panel.
y y
SUPER SAVING refers to how much power can be saved using the SUPER ENERGY SAVING
y y
function.
508 mm (20 inch)
3 W/h
18 W/h
SUPER ENERGY SAVING
ON
SUPER
SAVING TOTAL POWER REDUCTION:
: 3 W/h
LED
TOTAL CO2 REDUCTION:
SAVING
: 18 W/h
Description
OFF RESET
20 W
16 g
OK EXIT