Super Energy Saving Settings - LG E2051SZ Owner's Manual

SUPER ENERGY SAVING Settings

1
Press any button on the front of the Monitor set to
display the MONITOR SETUP OSD menu.
2
Press the MENU button to display the options in the
OSD Menu.
3
Select SUPER ENERGY SAVING by pressing the
▼ button.
4
Enter to SUPER ENERGY SAVING by pressing the
► button.
5
Set the options by pressing ◄ or ► buttons.
6
Select EXIT to leave the OSD menu.
To return to the upper menu or set other menu items,
use the up arrow ( ) button.
The available SUPER ENERGY SAVING settings are described below.
Menu
ON Enables SUPER ENERGY SAVING you can save energy with this energy-efficient function.
OFF Disables SUPER ENERGY SAVING.
RESET Resets the values of total energy consumption reduction and CO2 emission reduction estimates.
NOTE
y
TOTAL POWER REDUCTION: How much power is saved while using the monitor.
y
TOTAL CO2 REDUCTION: Change the TOTAL POWER REDUCTION to CO2.
y
SAVING DATA(W/h)
SUPER SAVING
LED SAVING
y
Saving Data depends on the Panel. So,those values should be different from each panel and panel
vendor.
y
LG calculated these values by using "broadcast video signal".
y
LED Saving means how much power can be saved using a WLED Panel instead of CCFL panel.
y
SUPER SAVING means how much power can be saved using the SUPER ENERGY SAVING
function.
470 mm (18.5 inch) 508 mm (20 inch)
3 W/h 3 W/h
3 W/h 18 W/h
CUSTOMIZING SETTINGS
Description
546 mm (21.5 inch) 584 mm (23 inch)
4 W/h
15 W/h
15
5 W/h
12 W/h