Page 1
OWNER’S MANUAL CINEMA 3D MONITOR Please read this manual carefully before operating your set and retain it for future reference. CINEMA 3D MONITOR MODEL D2343PB D2743PB www.lg.com...
Page 2
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.
USING 3D MODE - Attaching the Stand Base - Detaching the Stand Base SPECIFICATIONS - Mounting on a table - Using the cable holder D2343PB - Mounting on a wall D2743PB Preset Modes (Resolution) USING THE MONITOR SET Indicator Connecting to a PC...
ASSEMBLING AND PREPARING ASSEMBLING AND PREPARING Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories.
ASSEMBLING AND PREPARING Parts and buttons Power Indicator Lighting On: Turned on Lighting Off: Turned off (Power Button) Button (See p.12) Connection panel (See p.10)
Lay a foam mat or soft protective cloth on the surface to protect the screen from damage. Stand Body D2343PB Attach the Stand Body to the monitor set. Attach the Stand Base. Tighten the screw to the right with a coin.
Remove two screws and pull out the Stand Body from the monitor set. D2343PB Pull out the Stand Body and Stand Base from the monitor set. Turn the screw to the left with a coin.
ASSEMBLING AND PREPARING Mounting on a table Press (Power) button on the bottom switch panel to turn the power on. Lift and tilt the Monitor set into its upright position on a table. Leave a 10 cm (minimum) space from the wall for proper ventilation.
Page 9
ASSEMBLING AND PREPARING WARNING Using the Kensington security system The Kensington security system connector is When you adjust the angle, do not hold the located at the back of the Monitor set. For more bottom of the Monitor set frame as shown on information of installation and using, refer to the the following illustration, as may injure your fingers.
If you use improper screw, the product might be dealer. damaged and drop from mounted position. In The length of screws may differ depending this case, LG Electronics is not responsible for on the wall mount. Be sure to use the proper length. VESA compatible.
USING THE MONITOR SET USING THE MONITOR SET Connecting to a PC DVI-D connection Transmits a digital video signal from your PC to Your Monitor set supports Plug & Play*. the Monitor set. Connect the PC and the Monitor *Plug & Play: A PC recognizes a connected set with a DVI cable as shown in the following device that users connect to a PC and turn illustrations.
Page 12
USING THE MONITOR SET Self Image Setting Function CAUTION Press the power button on the bottom panel to turn the power on. When monitor power is turned Connect the signal on, the "Self Image Setting" Function is executed input cable and tighten automatically.
CUSTOMIZING SETTINGS CUSTOMIZING SETTINGS Press the desired button on the bottom of the Monitor set. Change the value of the menu item by pressing the buttons on the bottom of the Monitor set. To return to the upper menu or set other menu items, use the up arrow ( ) button.
CUSTOMIZING SETTINGS Customizing Settings Menu Settings Press MENU button on the bottom of the Monitor set to display the MENU OSD. Set the options by pressing the ◄ or ► or ▼ buttons. Select the "NEXT MENU" button to enter the more option settings.
CUSTOMIZING SETTINGS PICTURE Press MENU button on the bottom of the Monitor set to display the MENU OSD. Select the "NEXT MENU" button to enter the more option settings. Enter to PICTURE by pressing the ▼ button. Set the options by pressing the ◄ or ► or ▼ buttons.
CUSTOMIZING SETTINGS COLOR Press MENU button on the bottom of the Monitor set to display the MENU OSD. Select the "NEXT MENU" button to enter the more option settings. Select COLOR by pressing the ► button. Enter to COLOR by pressing the ▼ button. Set the options by pressing the ◄...
CUSTOMIZING SETTINGS DISPLAY Press MENU button on the bottom of the Monitor set to display the MENU OSD. Select the "NEXT MENU" button to enter the more option settings. Select DISPLAY by pressing the ► button. Enter to DISPLAY by pressing the ▼ button. Set the options by pressing the ◄...
CUSTOMIZING SETTINGS OTHERS Press MENU button on the bottom of the Monitor set to display the MENU OSD. Select the "NEXT MENU" button to enter the more option settings. Select OTHERS by pressing the ► button. Enter to OTHERS by pressing the ▼ button. Set the options by pressing the ◄...
CUSTOMIZING SETTINGS FUNC.Settings 3D SETTINGS To display the 3D OSD, press the FUNC. button at the bottom of the monitor. Press the ◄ , ► or ▼ button to change settings. Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button.
CUSTOMIZING SETTINGS Setting Dual Play Connect a game console to the monitor. To start Dual Play mode, press the FUNC. button at the bottom of the monitor. Select the screen split mode supported by the game. Put on the Dual Play glasses to enjoy game. NOTE What is Dual Play mode? When playing a 1:1 battle game with a game console, such as Playstation,XBox and Wii,users used...
CUSTOMIZING SETTINGS PICTURE MODE To display the PICTURE MODE OSD, press the FUNC. button at the bottom of the monitor. Set the options by pressing the ◄ or ► or ▼ buttons. Select EXIT to leave the OSD menu. < AV mode: HDMI input > <...
CUSTOMIZING SETTINGS SUPER+RESOLUTION To display SUPER+RESOLUTION OSD, press the FUNC. button on the bottom of the monitor . Press ◄ , ► or ▼ button to set up options. Select EXIT to leave the OSD menu. Each option is explained below. FUNC.
9 W/h The energy-saving data may vary depending on panel or panel supplier. LG measures the data by using a "Broadcast Video Signal". (Broadcasting video included: IEC 62087) The Super Energy Saving data indicates how much energy can be saved when the Super Energy...
TROUBLESHOOTING TROUBLESHOOTING Check the following before calling for service. No image appears y Check and see if the power cord is connected properly to the power Is the power cord of the display connected? outlet. y Press the Power button. Is the power indicator light on? Is the power on and the power y Adjust the brightness and the contrast.
Page 25
Be sure to install the display driver from the display driver CD (or driver? diskette) that comes with your display. Or, you can also download the driver from our web site: http://www.lg.com. y Make sure to check if the video card supports Plug&Play function. The screen is flickering.
If you wear third-party glasses, you may not see 3D images properly on the monitor. If you view 3D images outside the D2343PB y The optimal viewing angle of the monitor is 12° in optimal viewing angle or distance, vertical direction while 130°...
SPECIFICATIONS SPECIFICATIONS D2743PB Display Screen Type TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel,Anti-Glare coating 68.6 cm visible diagonal (27 inch) Pixel Pitch 0.311 mm x 0.311 mm (Pixel Pitch) Sync Input Horizontal Frequency 30 kHz to 83 kHz (Automatic) Vertical Frequency 56Hz to 75Hz (D-SUB, DVI-D) 56Hz to 61Hz (HDMI)
PRECAUTIONS TO TAKE WHEN VIEWING 3D IMAGES SAFETY PRECAUTIONS Precautions to take when WARNING viewing 3D images If you view 3D images from too close a distance, Warning about photosensitivity seizures your eyesight may deteriorate. Some users may have a seizure or other abnormal reactions when they are exposed to a flashing light If you view images in 3D for a long period of time, or a particular pattern in a video game or film.
(D). Place your hands gently on the keyboard, keeping your arms bent at the elbows and horizontally outright. D2343PB Monitor 3D viewing Monitor 3D optimal Optimal viewing Mode Size range (L) viewing distance (L) angle (D) When viewing 3D 58.4 cm...
Page 33
Make sure to read the Safety Precautions before using the product. Keep the Owner’s Manual (CD) in an accessible ENERGY STAR is a set of power-saving place for future reference. guidelines issued by the U.S.Environmental The model and serial number of the SET is Protection Agency(EPA).