LG D2242P Owner's Manual
Cinema 3d monitor
Hide thumbs
Also See for D2242P:
- Owner's manual (24 pages) ,
- Owner's manual (26 pages) ,
- Owner's manual (26 pages)
Related Manuals for LG D2242P
Summary of Contents for LG D2242P
- Page 1 OWNER’S MANUAL CINEMA 3D MONITOR Please read this manual carefully before operating your set and retain it for future reference. CINEMA 3D MONITOR MODEL D2242P D2542P www.lg.com...
-
Page 2: Table Of Contents
TABLE OF CONTENTS CONTENTS ASSEMBLING AND PREPARING PROPER POSTURE Unpacking Proper posture for using the Monitor set. Parts and buttons Precautions to take when viewing 3D im- Setting up the Monitor set ages - Attaching the Stand Base - Detaching the Stand Base and Body - Mounting on a table - Mounting on a wall USING THE MONITOR SET... -
Page 3: Assembling And Preparing
ASSEMBLING AND PREPARING ASSEMBLING AND PREPARING Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories. -
Page 4: Parts And Buttons
ASSEMBLING AND PREPARING Parts and buttons Power Indicator Lighting On: Turned on Lighting Off: Turned off (Power Button) Button (See p.12) AC-IN/ D-SUB DVI-D HDMI Connection panel (See p.10) - Page 5 When adjusting your display settings, always press the AUTO button on the MONITOR SETUP OSD. (Only supported in Analog Mode) The best display mode 1920 x 1080 (D2242P/D2542P) VOLUME (Only HDMI mode) Adjust the volume of the Monitor set.(See p.14) INPUT You can choose the input signal.
-
Page 6: Setting Up The Monitor Set
ASSEMBLING AND PREPARING Setting up the Monitor set Detaching the Stand Base and Body Attaching the Stand Base Place the Monitor set with the screen side down on a flat and cushioned surface. Place the Monitor set with the screen side Pull out the Stand Base and Stand Body from down on a flat and cushioned surface. -
Page 7: Mounting On A Table
ASSEMBLING AND PREPARING Mounting on a table WARNING When you adjust the angle, do not hold the Lift and tilt the Monitor set into its upright bottom of the Monitor set frame as shown on position on a table. the following illustration, as may injure your Leave a 10 cm (minimum) space from the wall fingers. -
Page 8: Mounting On A Wall
ASSEMBLING AND PREPARING Mounting on a wall Using the Kensington security system The Kensington security system connector is For proper ventilation, allow a clearance of 10 cm located at the back of the Monitor set. For more on each side and from the wall. Detailed information of installation and using, refer to the instructions are available from your dealer, see the manual supplied with the Kensington security... - Page 9 If you install the Monitor set on a ceiling or slanted wall, it may fall and result in severe injury. Use only an authorized LG wall mount and contact the local dealer or qualified personnel. Do not over tighten the screws as this may cause damage to the Monitor set and void your warranty.
-
Page 10: Using The Monitor Set
USING THE MONITOR SET USING THE MONITOR SET Connecting to a PC DVI-D connection Transmits a digital video signal from your PC to Your Monitor set supports Plug & Play*. the Monitor set. Connect the PC and the Monitor *Plug & Play: A PC recognizes a connected set with a DVI cable as shown in the following device that users connect to a PC and turn illustrations. - Page 11 USING THE MONITOR SET Self Image Setting Function CAUTION Press the power button on the front panel to turn the power on. When monitor power is turned on, Connect the signal the "Self Image Setting" Function is executed input cable and tighten automatically.
-
Page 12: Customizing Settings
CUSTOMIZING SETTINGS CUSTOMIZING SETTINGS Accessing The Main Menus Press any button on the front of the Monitor set to display the MONITOR SETUP OSD menu. Press the desired menu item. Change the value of the menu item by pressing the buttons on the front of the Monitor set. To return to the upper menu or set other menu items, use the up arrow ( ) button. -
Page 13: Customizing Settings
CUSTOMIZING SETTINGS Customizing Settings Menu Settings MENU Press any button on the front of the Monitor set to display the BRIGHTNESS MONITOR SETUP OSD menu. ORIGINAL RATIO WIDE 3D COLOR EFFECT PRESET Press the MENU button to display the options in the OSD COLOR TEMP WARM PRESET... -
Page 14: 3D Settings(Only 3D Mode)
CUSTOMIZING SETTINGS 3D Settings(Only 3D mode) 3D MODE OFF(1/4) Press any button on the front of the Monitor set to display the 3D L/R CHANGE R-L(1/2) MONITOR SETUP OSD menu. 3D - > 2D Press the 3D button to display the options in the OSD menu. EXIT Set the options by pressing the buttons on the front of the Monitor set. -
Page 15: Super Energy Saving Settings
Saving Data depends on the Panel. So,those values should be different from each panel and panel vendor. LG calculated these values by using “broadcast video signal”. LED Saving refers to how much power can be saved using a WLED Panel instead of CCFL panel. -
Page 16: Troubleshooting
TROUBLESHOOTING TROUBLESHOOTING Check the following before calling for service. No image appears y Check and see if the power cord is connected properly to the power Is the power cord of the display connected? outlet. y Press the Power button. Is the power indicator light on? Is the power on and the power y Adjust the brightness and the contrast. - Page 17 Be sure to install the display driver from the display driver CD (or driver? diskette) that comes with your display. Or, you can also download the driver from our web site: http://www.lg.com. y Make sure to check if the video card supports Plug&Play function.
-
Page 18: Troubleshooting When Using 3D Mode
TROUBLESHOOTING WHEN USING 3D MODE TROUBLESHOOTING WHEN USING 3D MODE I can see a swirling oil-like pattern on the monitor when the monitor is turned off. y This is caused by the interference of external light in the air layer between the LCD surface and 3D filter. The pattern becomes almost invisible when you turn on the power again. -
Page 19: Specifications
SPECIFICATIONS SPECIFICATIONS D2242P Display Screen Type 54.6 cm (21.5 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size: 54.6 cm Pixel Pitch 0.248 mm x 0.248 mm (Pixel Pitch) Sync Input Horizontal Frequency 30 kHz to 83 kHz (Automatic) - Page 20 SPECIFICATIONS SPECIFICATIONS D2542P Display Screen Type 63.4 cm (25 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size: 63.4 cm Pixel Pitch 0.288 mm x 0.288 mm (Pixel Pitch) Sync Input Horizontal Frequency 30 kHz to 83 kHz (Automatic) Vertical Frequency 56Hz to 75Hz (D-SUB, DVI-D) 56Hz to 61Hz (HDMI)
-
Page 21: Preset Modes (Resolution)
SPECIFICATIONS Preset Modes (Resolution) Horizontal Vertical Display Modes (Resolution) Polarity(H/V) Frequency(kHz) Frequency(Hz) 720 x 400 31.468 640 x 480 31.469 640 x 480 37.500 800 x 600 37.879 800 x 600 46.875 1024 x 768 48.363 1024 x 768 60.123 1152 x 864 67.500 1280 x 1024... -
Page 22: Precautions To Take When Viewing 3D Images
PRECAUTIONS TO TAKE WHEN VIEWING 3D IMAGES PRECAUTIONS TO TAKE WHEN VIEWING 3D IMAGES If you view images in the 3D mode for a long period of time (playing games, watching movies etc.), you may feel dizzy. We strongly recommend you to take a rest after one hour of viewing 3D. (The time of experiencing dizziness varies depending on the individual.) Please view 3D images at the optimal viewing angle and at the recommended distance from the product. - Page 23 PROPER POSTURE PROPER POSTURE Proper posture for using the Monitor set. Adjust your distance from the Monitor set to allow you to view images from 50 cm to 90 cm the optimal distance (L). Adjust the Adjust the location of the Monitor set and Monitor set to avoid it your posture to...
- Page 25 Make sure to read the Safety Precautions before using the product. Keep the Owner’s Manual (CD) in an accessible ENERGY STAR is a set of power-saving place for future reference. guidelines issued by the U.S.Environmental The model and serial number of the SET is Protection Agency(EPA).