Super Energy Saving Settings - LG D2242P Owner's Manual

SUPER ENERGY SAVING Settings

1
Press any button on the front of the Monitor set to
display the MONITOR SETUP OSD menu.
2
Press the MENU button to display the options in the
OSD menu.
3
Select SUPER ENERGY SAVING by pressing the
buttons on the front of the Monitor set and set the
options.
4
Select EXIT to leave the OSD menu.
To return to the upper menu or set other menu items,
use the up arrow ( ) button.
The available picture settings are described below.
Menu
ON Enables SUPER ENERGY SAVING you can save energy with this energy-efficient function.
OFF Disables SUPER ENERGY SAVING.
RESET Resets the values of total energy consumption reduction and CO2 emission reduction estimates.
NOTE
TOTAL POWER REDUCTION: How much power is saved while using the monitor.
y
TOTAL CO2 REDUCTION: Change the TOTAL POWER REDUCTION to CO2.
y
SAVING DATA(W/h)
y
SUPER SAVING
LED SAVING
Saving Data depends on the Panel. So,those values should be different from each panel and panel
y
vendor.
LG calculated these values by using "broadcast video signal".
y
LED Saving refers to how much power can be saved using a WLED Panel instead of CCFL panel.
y
SUPER SAVING refers to how much power can be saved using the SUPER ENERGY SAVING
y
function.
546 mm(22 inch) 634 mm(25 inch)
4 W/h 5 W/h
15 W/h 12 W/h
CUSTOMIZING SETTINGS
SUPER ENERGY SAVING
ON
SUPER
SAVING
TOTAL POWER REDUCTION:
: 5 W/h
LED
TOTAL CO2 REDUCTION:
SAVING
: 12 W/h
Description
15
OFF RESET
20 W
16 g
OK EXIT