Related Manuals for LG D2342PY
Summary of Contents for LG D2342PY
- Page 1 OWNER’S MANUAL SUPER 3D MONITOR Please read this manual carefully before operating your set and retain it for future reference. SUPER 3D MONITOR MODEL D2342P www.lg.com...
-
Page 2: Table Of Contents
TABLE OF CONTENTS CONTENTS ASSEMBLING AND PREPARING PROPER POSTURE Unpacking Proper posture for using the Monitor set. Parts and buttons Precautions to take when viewing 3D im- Setting up the Monitor set ages - Attaching the Stand Base - Detaching the Stand Base and Body - Mounting on a table - Mounting on a wall USING THE MONITOR SET Connecting to a PC - D-SUB connection - DVI-D connection - HDMI connection CUSTOMIZING SETTINGS Accessing The Main Menus Customizing Settings - Menu Settings - 3D Settings(Only 3D mode) - Volume Settings (Only supported in HDMI) - SUPER ENERGY SAVING Settings TROUBLESHOOTING TROUBLESHOOTING WHEN USING 3D MODE... -
Page 4: Assembling And Preparing
ASSEMBLING AND PREPARING Parts and buttons Power Indicator Lighting On: Turned on Lighting Off: Turned off (Power Button) Button (See p.13) AC-IN/ D-SUB DVI-D HDMI Connection panel (See p.10) - Page 5 ASSEMBLING AND PREPARING Button Description MENU Accesses the main menus.(See p.13) OSD LOCKED/ This function allows you to lock the current control settings, so UNLOCKED that they cannot be inadvertently changed. Press and hold the MENU button for several seconds. The message "OSD LOCKED" should appear. You can unlock the OSD controls at any time by pushing the MENU button for several seconds. The message "OSD UNLOCKED" should appear. SUPER ENERGY Use this button to enter SUPER ENERGY SAVING menu.For SAVING Button more information.(See p.15) 3D display settings.(See p.14) AUTO When adjusting your display settings, always press the AUTO button on the MONITOR SETUP OSD. (Only supported in Analog Mode) The best display mode 1920 x 1080 VOLUME (Only HDMI mode) Adjust the volume of the Monitor set.(See p.14) INPUT You can choose the input signal. y When two input signals are connected, you can select the input signal (D-SUB/DVI/ HDMI) you want. y When only one signal is connected, it is automatically detected. The default setting is D-SUB. EXIT Exit the OSD(On Screen Display). Turns the power on or off. (Power Button) Power Indicator The power indicator stays blue if the display is running properly (On Mode). If the display is in Sleep Mode, the power...
-
Page 6: Setting Up The Monitor Set Ages
ASSEMBLING AND PREPARING Setting up the Monitor set Detaching the Stand Base and Body Attaching the Stand Base Place the Monitor set with the screen side down on a flat and cushioned surface. Place the Monitor set with the screen side Turn the screw to the left, and then pull out the down on a flat and cushioned surface. Stand Base from the Stand Body. CAUTION Lay a foam mat or soft protective cloth on the surface to protect the screen from damage. Assemble the Stand Body into the product in the correct direction as shown in the picture. Make sure you push it until you hear it “click”. Hinge Body Pull out the Stand Body from the Monitor set. Stand Body Attach the Stand Base and then tighten the screw to the right with a Coin. CAUTION This illustration depicts the general model of connection. Your monitor may differ from the items shown in the picture. Stand Base Do not carry the product upside down holding only the stand base. The product may fall and get damaged or injure your foot. -
Page 7: Mounting On A Table
ASSEMBLING AND PREPARING Mounting on a table WARNING When you adjust the angle, do not hold the Lift and tilt the Monitor set into its upright bottom of the Monitor set frame as shown on position on a table. the following illustration, as may injure your Leave a 10 cm (minimum) space from the wall fingers. for proper ventilation. 10 cm 10 cm 10 cm 10 cm Do not touch or press the screen when adjusting the angle of the monitor. Connect the Power Cord to a wall outlet. NOTE Tilt from +15 to -5 degrees up or down to adjust the angle of the Monitor set to suit your view. Press (Power) button on the front switch panel to turn the power on. Front Rear CAUTION Unplug the power cord before moving the Monitor to another location. Otherwise electric shock may occur. -
Page 8: Mounting On A Wall
ASSEMBLING AND PREPARING Mounting on a wall Using the Kensington security system The Kensington security system connector is For proper ventilation, allow a clearance of 10 cm located at the back of the Monitor set. For more on each side and from the wall. Detailed information of installation and using, refer to the instructions are available from your dealer, see the manual supplied with the Kensington security optional Tilt Wall Mounting Bracket Installation and system or visit http://www.kensington.com . Setup Guide. Connect the Kensington security system cable between the Monitor set and a table. 10 cm 10 cm 10 cm 10 cm NOTE The Kensington security system is optional. When you install the Monitor set using a wall You can obtain it from most electronics stores. mounting interface (optional parts), attach it carefully so it will not drop. Please use VESA standard as below. 784.8 mm (30.9 inch) and under * Wall Mount Pad Thickness : 2.6 mm * Screw : Φ 4.0 mm x Pitch 0.7 mm x Length 10 mm 787.4 mm (31.0 inch) and above * Please use VESA standard wall mount pad and screws. - Page 9 USING THE MONITOR SET Model D2342P VESA (A x B) 75 x 75 Standard screw Number of screws Wall mount bracket RW120 (optional) CAUTION Disconnect the power cord first, and then move or install the Monitor set. Otherwise electric shock may occur. If you install the Monitor set on a ceiling or slanted wall, it may fall and result in severe injury. Use only an authorized LG wall mount and contact the local dealer or qualified personnel. D o not over tighten the screws as this may cause damage to the Monitor set and void your warranty. U se only screws and wall mounts that meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty. NOTE Use the screws that are listed on the VESA standard screw specifications. The wall mount kit will include an installation manual and necessary parts. The wall mount bracket is optional. You can obtain additional accessories from your local dealer.
-
Page 10: Using The Monitor Set
USING THE MONITOR SET USING THE MONITOR SET Connecting to a PC DVI-D connection Transmits a digital video signal from your PC to the Your Monitor set supports Plug & Play*. Monitor set. Connect the PC and the Monitor set *Plug & Play: A PC recognizes a connected with a DVI cable as shown in the following device that users connect to a PC and turn illustrations. on, without device configuration or user intervention. D-SUB DVI-D HDMI D-SUB connection Transmits analog video from your PC to the Monitor set. Connect the PC and the Monitor set with the supplied D-sub 15 pin signal cable as shown in the following illustrations. D-SUB DVI-D HDMI DVI OUT HDMI connection Transmits the digital video and audio signals from your PC or A/V to the Monitor set. Connect the PC or A/V and the Monitor set with the HDMI cable as shown in the following illustrations. RGB OUT D-SUB DVI-D HDMI NOTE When using a D-Sub signal input cable connector for Macintosh HDMI OUT... - Page 11 USING THE MONITOR SET Self Image Setting Function CAUTION Press the power button on the front panel to turn the power on. When monitor power is turned on, Connect the signal the "Self Image Setting" Function is executed input cable and tighten automatically. (Only supported in Analog Mode) it by turning the screws clockwise. Do not press the screen with your finger for a long time as this may result in temporary distortion on the screen. Avoid displaying a fixed image on the screen for a long period of time to prevent image burn. Use a screensaver if possible. NOTE NOTE "Self Image Setting" Function. When you want to use two PC in our Monitor, This function provides the user with optimal please connect the signal cable(D-SUB/ display settings.When the user connects DVI-D/HDMI) respectively in Monitor set. the monitor for the first time, this function If you turn the Monitor set on while it is cold, automatically adjusts the display to optimal the screen may flicker. This is normal. settings for individual input signals.(Only Some red, green, or blue spots may appear supported in Analog Mode) on the screen. This is normal. ‘AUTO’ Function. When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, press the AUTO function button to improve resolution.
-
Page 12: Customizing Settings
CUSTOMIZING SETTINGS CUSTOMIZING SETTINGS Accessing The Main Menus Press any button on the front of the Monitor set to display the MONITOR SETUP OSD menu. Press the desired menu item. Change the value of the menu item by pressing the buttons on the front of the Monitor set. To return to the upper menu or set other menu items, use the up arrow ( ) button. Select EXIT to leave the OSD menu. Monitor set Buttons MENU (See p.13) AUTO (See p.5) EXIT Sets the screen options. Optimizes the resolution. Exits the OSD menu. MONITOR SETUP MENU AUTO VOLUME INPUT EXIT 3D (See p.14) VOLUME (See p.14) INPUT Sets the 3D mode. Sets the volume. Sets the external input. NOTE Different menu items are enabled depending on the type of input signal. D-SUB / DVI Mode: MENU, 3D, AUTO, INPUT, EXIT HDMI Mode: MENU, 3D, VOLUME, INPUT, EXIT... -
Page 13: Customizing Settings
CUSTOMIZING SETTINGS Customizing Settings Menu Settings MENU Press any button on the front of the Monitor set to display the BRIGHTNESS ORIGINAL RATIO WIDE MONITOR SETUP OSD menu. 3D COLOR EFFECT PRESET COLOR TEMP Press the MENU button to display the options in the OSD WARM PRESET menu. GREEN Set the options by pressing the buttons on the front of the BLUE Monitor set. CONTRAST BLACK LEVEL HIGH Select EXIT to leave the OSD menu. LANGUAGE ENGLISH SUPER ENEYGY SAVING To return to the upper menu or set other menu items, use the FACTORY RESET up arrow ( ) button. EXIT The available program settings are described below. -
Page 14: 3D Settings(Only 3D Mode)
CUSTOMIZING SETTINGS 3D Settings(Only 3D mode) 3D MODE OFF(1/4) Press any button on the front of the Monitor set to display the 3D L/R CHANGE R-L(1/2) MONITOR SETUP OSD menu. 3D - > 2D Press the 3D button to display the options in the OSD menu. EXIT Set the options by pressing the buttons on the front of the Monitor set. Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. The available picture settings are described below. Menu Description 3D MODE Select the format of 3D video data. (Enabled only for HDMI VIDEO TIMING) SIDE BY SIDE Left and right pictures are arranged in Side by Side layout. TOP & BOTTOM Left and right pictures are arranged in Top and Bottom layout. LINE INTERLACED Left and right pictures are arranged in line by line. Turns off 3D Mode. 3D L/R CHANGE Changes which frame is shown to each eye. Odd lines are Right picture and even lines are Left picture. Odd lines are Left picture and even lines are Right picture. 3D - > 2D Converts 3D images into 2D. (Enabled only for HDMI VIDEO TIMING) Displays images in 3D. -
Page 15: Super Energy Saving Settings
: 5 W/h Select SUPER ENERGY SAVING by pressing the TOTAL CO2 REDUCTION: 16 g SAVING : 12 W/h buttons on the front of the Monitor set and set the options. EXIT Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. The available picture settings are described below. Menu Description Enables SUPER ENERGY SAVING you can save energy with this energy-efficient function. Disables SUPER ENERGY SAVING. RESET Resets the values of total energy consumption reduction and CO2 emission reduction estimates. NOTE TOTAL POWER REDUCTION: How much power is saved while using the monitor. TOTAL CO2 REDUCTION: Change the TOTAL POWER REDUCTION to CO2. SAVING DATA(W/h) 584 mm (23 inch) SUPER SAVING 5 W/h LED SAVING 12 W/h Saving Data depends on the Panel. So,those values should be different from each panel and panel vendor. LG calculated these values by using “broadcast video signal”. LED Saving refers to how much power can be saved using a WLED Panel instead of CCFL panel. SUPER SAVING refers to how much power can be saved using the SUPER ENERGY SAVING function. -
Page 16: Troubleshooting
TROUBLESHOOTING TROUBLESHOOTING Check the following before calling for service. No image appears y Check and see if the power cord is connected properly to the power Is the power cord of the display connected? outlet. y Press the Power button. Is the power indicator light on? Is the power on and the power y Adjust the brightness and the contrast. indicator blue or green? Is the power indicator flickering? y If the display is in power saving mode, try moving the mouse or pressing any key on the keyboard to bring up the screen. y Try to turn on the PC. Do you see an "OUT OF RANGE" y This message appears when the signal from the PC (video card) is message on the screen? out of horizontal or vertical frequency range of the display. See the 'Specifications' section of this manual and configure your display again. y This message appears when the signal cable between your PC and Do you see a "CHECK SIGNAL CABLE" message on the screen? your display is not connected. Check the signal cable and try again. Do you see a "OSD LOCKED" message on the screen? y You can secure the current control settings, so that they cannot be Do you see “OSD LOCKED” when you push MENU button? inadvertently changed. You can unlock the OSD controls at any time by pushing the MENU button for several seconds: the message “OSD UNLOCKED” will appear. - Page 17 TROUBLESHOOTING CAUTION Check Control Panel ► Display ► Settings and see if the frequency or the resolution were changed. If yes, readjust the video card to the recommend resolution. If the recommended resolution (optimal resolution) is not selected, letters may be blurred and the screen may be dimmed, truncated or biased. Make sure to select the recommend resolution. The setting method can differ by computer and O/S (Operation System), and resolution mentioned above may not be supported by the video card performance. In this case, please ask to the computer or the video card manufacturer. Display image is incorrect The screen color is mono or y Check if the signal cable is properly connected and use a screwdriver abnormal. to fasten if necessary. y Make sure the video card is properly inserted in the slot. y Set the color setting higher than 24 bits (true color) at Control Panel ► Settings. y Check if the screen is set to interlace mode and if yes, change it to the The screen blinks. recommend resolution. Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message? Have you installed the display y Be sure to install the display driver from the display driver CD (or driver? diskette) that comes with your display. Or, you can also download the driver from our web site: http://www.lg.com. y Make sure to check if the video card supports Plug&Play function.
-
Page 18: Troubleshooting When Using 3D Mode
TROUBLESHOOTING TROUBLESHOOTING WHEN USING 3D MODE I can see a swirling oil-like pattern on the monitor when the monitor is turned off. y This is caused by the interference of external light in the air layer between the LCD surface and 3D filter. The pattern becomes almost invisible when you turn on the power again. I cannot see 3D image properly y When you view 3D images with this monitor, it is very important If you are not using the glasses provided with the monitor, that you use the glasses provided with the monitor. The glasses are designed to compensate optically for the 3D filter attached to the surface of the monitor. If you wear third-party glasses, you may not see 3D images properly on the monitor. If you view 3D images outside the y The optimal viewing angle of the monitor is 12° in vertical direction optimal viewing angle or distance, while 80° in horizontal direction; the optimal viewing distance is between 50 cm to 90 cm from the monitor. When you view 3D images outside the optimal viewing angle or viewing distance, the images may look overlapped or not be displayed properly in 3D. y Please set the resolution of the monitor to the maximum (1920 x If you have not set the resolution, 1080 @ 60 Hz) in the display settings. The 3D software may not work properly if the resolution is not set to the maximum. y The stripe images in the odd-numbered lines are the ones that your If the images that your left and right eyes see are reversed, right eye sees on the monitor. If you only see the stripe images, not 3D images, set the images for your right eye to be displayed in the odd-numbered lines by changing the player or viewer option of the 3D software. y This monitor works both in 2D and 3D mode. You can view a video in I cannot see 3D but only 2D images. -
Page 19: Specifications
SPECIFICATIONS SPECIFICATIONS Display Screen Type 58.4 cm (23 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size: 58.4 cm Pixel Pitch 0.265 mm x 0.265 mm (Pixel Pitch) Sync Input Horizontal Frequency 30 kHz to 83 kHz (Automatic) Vertical Frequency 56Hz to 75Hz (D-SUB, DVI-D) 56Hz to 61Hz (HDMI) Input Form Separate Sync. Digital Video Input Signal Input 15 pin D-SUB Connector /DVI-D Connector (Digital) HDMI Connector Input Form RGB Analog (0.7 Vp-p/ 75 ohm), Digital Resolution D-SUB(Analog) : 1920 x 1080 @ 60 Hz DVI / HDMI (Digital) : 1920 x 1080 @ 60 Hz Recommend VESA 1920 x 1080 @ 60 Hz Plug & Play DDC 2B(Analog,Digital) Power Consumption On Mode : 39 W(Typ.) Sleep Mode ≤ 0.5 W Off Mode ≤ 0.5 W Power Input AC 100-240 V~ 50 / 60 Hz 1.0 A Dimensions With Stand 54.6 cm x 40.7 cm x 17.9 cm (Width x Height x Depth) Without Stand 54.6 cm x 34.2 cm x 5.7 cm Weight... -
Page 20: Preset Modes (Resolution)
SPECIFICATIONS Preset Modes (Resolution) Horizontal Vertical Display Modes (Resolution) Polarity(H/V) Frequency(kHz) Frequency(Hz) 720 x 400 31.468 640 x 480 31.469 640 x 480 37.500 800 x 600 37.879 800 x 600 46.875 1024 x 768 48.363 1024 x 768 60.123 1152 x 864 67.500 1280 x 1024 63.981 1680 x 1050 65.290 1920 x 1080 67.500 Recommend Mode HDMI 3D TIMING 3D Format Resolution Refresh Rate Limitation Frame Packing 1080 p 24 Hz Frame Packing 720 p 50/60 Hz Side-by-Side(Half) -
Page 21: Precautions To Take When Viewing 3D Images
PRECAUTIONS TO TAKE WHEN VIEWING 3D IMAGES PRECAUTIONS TO TAKE WHEN VIEWING 3D IMAGES If you view images in the 3D mode for a long period of time (playing games, watching movies etc.), you may feel dizzy. We strongly recommend you to take a rest after one hour of viewing 3D. (The time of experiencing dizziness varies depending on the individual.) Please view 3D images at the optimal viewing angle and at the recommended distance from the product. Otherwise, 3D images may appear to be overlapped or may not be displayed properly. If you view 3D images too closely for a long period of time, this may result in dizziness or blurred vision. Please use the device at the recommended distance. If you are pregnant, elderly or have heart problems, we recommend that you do not view 3D images. This is because the 3D images can cause disorientation and confusion. 3D images can also cause nausea or vomiting for users under the influence of alcohol. In this situation, please do not view 3D images. Parents/guardians should monitor children’s viewing of 3D images because they may not be used to the 3D viewing experience and lack knowledge on how to handle potential risks. Do not use the 3D glasses as regular glasses, sunglasses or goggles. This may cause your vision to worsen. Do not keep the 3D glasses in an extremely hot or cold place. This may the shape of the glasses to change and become damaged. Do not use the 3D glasses if they are damaged because this may cause your vision to worsen, or you may experience dizzin. The lenses of the 3D glasses (polarizing film) are easily scratched. Use a soft clean cloth when cleaning them. Do not use any chemical cleaning products on the glasse. CAUTION Warning about photosensitivity seizures Some users may have a seizure or other abnormal symptoms when they are exposed to a flashing light or particular pattern in a video game or movie. If anyone in your family has a history of epilepsy or has ever experienced any kind of seizure, please consult with your doctor before viewing 3D images. If you exhibit any of the symptoms listed below when viewing 3D images, please stop viewing immediately and consult with your doctor even if you do not have previous medical problems of this nature. Symptoms Dizziness, blurred vision or facial tics, involuntary movements, twitching, blackouts, confusion, disorientation and wrong state. To prevent a photosensitivity seizure, please follow the instructions below. - Page 22 PROPER POSTURE PROPER POSTURE Proper posture for using the Monitor set. Adjust your distance from the Monitor set to allow you to view images from 50 cm to 90 cm the optimal distance (L). Adjust the Adjust the location of the Monitor set and Monitor set to avoid it your posture to reflecting light. allow you to view images at the optimal viewing angle (D). Place your hands gently on the keyboard, keeping your arms bent at the elbows and horizontally outright. Mode Size(Inch) Optimal viewing distance (L) Optimal viewing angle (D) When viewing 3D images 58.4 cm 50 cm to 90 cm 12° Precautions to take when viewing 3D images Wear the 3D glasses provided with the Monitor set. Watch your posture. Remain at the optimal distance and angle when viewing 3D images. (Viewing 3D images too closely may cause your vision to worsen, or you may experience dizziness.)
- Page 24 Make sure to read the Safety Precautions before using the product. Keep the Owner’s Manual (CD) in an accessible ENERGY STAR is a set of power-saving place for future reference. guidelines issued by the U.S.Environmental The model and serial number of the SET is Protection Agency(EPA).