Table of Contents
Advertisement
Touchmonitor Connections
1.
Connect the DVI or VGA video cables between the monitor's DVI/VGA input
connectors and your DVI/VGA video source respectively. Tighten the video
cable's screws with the best performance.
2.
Connect the USB touch cable between the monitor's USB connector & your
PC's USB port.
3.
Connect a 12VDC power supply to the monitor's input power jack.
4.
The touchmonitor ships in an ON state, video should be displayed on your
monitor already.
User Manual – 1541L
SW601635 Rev A - Page 6 of 27
Advertisement
Table of Contents
