Table of Contents
Advertisement
General Mounting Information
The OSD text can be rotated through the OSD menu to better suit your mounting orientation.
Rear VESA Mount
A four-hole 75x75mm mounting pattern for M4 screws is provided on the rear of the monitor.
By using a Phillips screwdriver to access this mounting interface. The VESA
FDMI-compliant counting is coded: VESA MIS-D, 75, C.
Chapter 3 – Mounting
User Manual – 1541L
SW601635 Rev A_Template
-
Page 13 of 27
Advertisement
Table of Contents
