Table of Contents
Advertisement
On-Screen Display (OSD)
Five OSD buttons are located on REMOTE OSD controller. These can be used to adjust
various display parameters.
The buttons and their functionality are:
Button
Function when OSD is not displayed:
Menu
Display OSD main menu
Display OSD Brightness submenu
Display OSD Contrast submenu
Select
Display Video Source submenu
Power
Power on/off
Using the OSD buttons controls an on-screen graphical user interface which displays on top of
your input video, allowing intuitive adjustment of the following display parameters:
Parameter
Increase/decrease monitor brightness.
Brightness
Default: maximum
Increase/decrease monitor contrast.
Contrast
Default: best gray-shade performance
Allows fine adjustments of the panel's pixel dot clock.
Clock
Only applicable for VGA input video
Allows fine adjustments of the panel's pixel dot clock phase.
Phase
Only applicable for VGA input video
Moves the image horizontally on the display in single-pixel increments.
H-position
Default: centered.
Only applicable for VGA input video
Moves the image vertically on the display in single-pixel increments.
V-position
Default: centered.
Only applicable for VGA input video
Automatically adjusts the system clock to the input analog VGA video signal, affecting the
H-position, V-position, Clock, and Phase menu items.
Auto Adjust
Only applicable for VGA input video
Available Adjustment
User Manual – 1541L
SW601635 Rev A_Template
-
Function when OSD is displayed:
Return to previous OSD menu
Increase value of selected parameter /
select previous menu item
Decrease value of selected parameter /
select next menu item
Select parameter for adjustment /
select submenu to enter
Power on/off
Page 18 of 27
Advertisement
Table of Contents
