Palm Rest
Removing the Palm Rest Assembly
1.
Follow the procedures in
ATG Handle (only for E6420 ATG systems).
2.
Remove the
ATG Port Cover (only for E6420 ATG systems).
3.
Remove the
Battery .
4.
Remove the
SD Card .
5.
Remove the
Base Cover .
6.
Remove the
Optical Drive .
7.
Remove the
Hard Drive .
8.
Remove the
WWAN Card .
9.
Remove the
Bluetooth Card .
10. Remove the
Keyboard Trim .
11. Remove the
Keyboard .
12. Remove the
13. Remove the screws that secure the palm rest assembly to the computer.
14. Turn the system and remove the screws that secure the palm rest assembly
to the computer.
Before Working On Your Computer .
21
65