Installing Dc-In Port - Dell Latitude E6420 Owner's Manual

Installing DC-In Port

1. Push the DC-in trim and place it into the system.
2. Place the DC-in cable into the system.
3. Insert the DC-in bracket.
4. Tighten the screw securing the DC-in bracket.
System Board .
5. Install the
ExpressCard Cage .
6. Install the
Palmrest Assembly .
7. Install the
Modem Card .
8. Install the
Keyboard .
9. Install the
Keyboard Trim .
10. Install the
Bluetooth Card .
11. Install the
Heat Sink and Processor .
12. Install the
Coin Cell Battery .
13. Install the
WWAN Card .
14. Install the
WLAN Card .
15. Install the
Hard Drive .
16. Install the
Memory .
17. Install the
Optical Drive .
18. Install the
ExpressCard .
19. Install the
Base Cover .
20. Install the
SD Card .
21. Install the
Battery .
22. Install the
ATG Port Cover (only for E6420 ATG systems).
23. Install the
ATG Handle (only for E6420 ATG systems).
24. Install the
25. Follow the procedures in
102
After Working Inside Your Computer .