Switching The Input Signal; Using The Mute Button; Using The D.zoom Buttons - Panasonic PT-VX400NTU Operating Instructions Manual

Basic operations by using the remote control
Reduce the top
left corner part
with press ►▼.
Keystone
Press the
<SELECT>
button
Keystone
Reduce the bottom
left corner part with
press ►▲.
Note
The white arrows indicate that there is no correction.
z
A red arrow indicates the direction of correction.
z
An arrow disappears at the maximum correction.
z
If you press the <KEYSTONE> button on the remote
z
control once more while the keystone dialog box is being
displayed, the keystone adjustment will be canceled.
Æ
( page 53)
The adjustable range is limited depending on the input
z
signal.
[Standard] and [Corner correction] functions cannot
z
be adjusted at the same time. If one of the functions
is adjusted, and then the other one will be reset
automatically.

Switching the input signal

You can switch the input signals to project.
Buttons
Press (<COMPUTER 1>,<COMPUTER
2>, <HDMI>, <VIDEO>, <S-VIDEO>, or
<NETWORK>) button on the remote
control.
COMPUTER 1
COMPUTER 2
38
- ENGLISH
Reduce the top
right corner part
with press ◄▼.
Press the
<SELECT>
button
Keystone
Press the
<SELECT>
button
Press the
<SELECT>
button
Keystone
Reduce the bottom
right corner part
with press ◄▲.
Switches to Computer 1(RGB)/
Computer 1(Component)/
Computer 1(Scart) input.
Switches to Computer 2(RGB)
input.
HDMI Switches to HDMI input.
VIDEO Switches to Video input.
S-VIDEO Switches to S-video input.
NETWORK Switches to Network input.
Note
Each press of the <INPUT> button on the Control Panel
z
of the main unit switches the settings as shown below.
( Æ page 22)
Computer 1 (RGB)/
Computer 1 (Scart)/ *
Computer 1 (Component)
Network
*
It depends on the item you selected in the
[Computer 1] submenu of the [Input] menu.

Using the MUTE button

Press this button on the remote control to select [On]
to temporarily turn off the sound.
Button
Press <MUTE> button on the remote
control.
Note
To turn the sound back on, press this button again or
z
press the <VOLUME +/–> buttons. (

Using the D.ZOOM buttons

This function allows you to enter to the Digital zoom
+/– mode.
Buttons
Press <D.ZOOM +/- > buttons on the
remote control.
Note
For details, see "Screen" of Main menu. (
z
Computer 2
HDMI
(RGB)
S-video Video
Æ page 55)
Æ page 53)