HP D5970A - NetServer - LCII User Manual page 60

Appendix A
Control Panel Item
Power Button
Power-On Light
Reset Button
Hard Disk Activity Light 1
Hard Disk Activity Light 2
Keyboard Lock Button
Keyboard Lock Light
54
Table A-1. Control Panel Description
Description
Turns the NetServer on and off. Note that when
the NetServer is turned off, the power to the
internal circuitry and mass storage devices is
disabled; however, AC power is still applied to
the power supply. Always disconnect the
power cord before removing the cover.
One Power Supply: Turns green when the
NetServer is on.
Two Power Supplies: Turns green when both
power supplies are on. Flashing light when one
power supply or one line cord has a fault.
Restarts the NetServer. You can press this
button if the NetServer "hangs" or "locks up"—
it has the same effect as turning the NetServer
off and on. Save any work before pressing the
Reset button. Any information not saved is lost
when the NetServer shuts down.
Yellow indicates activity on the Embedded
SCSI A bus or IDE bus.
Yellow indicates activity on the Embedded
SCSI B bus.
Prevents unauthorized use of the keyboard.
Press the keyboard lock button to lock the
keyboard. Enter the password to unlock the
keyboard. For more information, see
"Configuring System Security" in Information
Assistant.
Turns yellow when the keyboard is locked.
Control Panel Description