Advanced Settings - HP ProBook 4325s - Notebook PC User Manual

3. For more convenience, click the slider to move it to the left, or for more accuracy, click the slider
to move it to the right.
●
Convenience—To make it easier for enrolled users to gain access in marginal situations,
click the slider bar to move it to the Convenience position.
●
Balance—To provide a good compromise between security and usability, or if you have
sensitive information or your computer is located in an area where unauthorized logon
attempts can occur, click the slider bar to move it to the Balance position.
●
Accuracy—To make it more difficult for a user to gain access if enrolled scenes or current
lighting conditions are below normal and less likely that a false acceptance can occur, click
the slider bar to move it to the Accuracy position.
NOTE:
4. Click Apply.

Advanced settings

1. Click Start, click All Programs, click HP, and then click HP ProtectTools Administrative
Console.
2. Click Devices, and then click Face.
3. Click Advanced.
●
Do not require user name for Windows logon.
◦
◦
●
Enforce the use of PIN for face logon—Select the check box to require each user to set up
and use a PIN (personal identification number) for logon.
◦
◦
◦
4. Click OK.
The Security level applies to all users
Select the check box to enable users to log on to Windows without a user name.
Clear the check box to require a user name for logon.
Minimum length allowed for PIN—Click the up arrow to increase or the down arrow to
decrease the minimum number of characters required for the PIN.
Maximum length allowed for PIN—Click the up arrow to increase or the down arrow
to decrease the maximum number of characters allowed for the PIN.
Maximum retries allowed for PIN—Click the up arrow to increase or the down arrow
to decrease the maximum number of times the PIN can be reentered.
Specifying device settings 17