Task 4 - Configuring The Scs Settings - Lexmark T656 User Manual

Configuring the
SCS Settings
T :
IP
Refer to Operations Reference - TN3270E
SETUP: SCS3270 Defaults, page
differences in these settings.
TEST OPTIONS Option
SCS3270 Defaults
Mainframe Installation Setup: Task 4 - Configuring the SCS Settings
Task 4 -
Several SCS option values may need to be changed to properly for-
mat and print SCS jobs that do not contain formatting commands in
the job. The following three settings are usually the most important,
but there are many other possibilities.
A. To select Non-US SCS3270 Defaults
Factory defaults are US. To change or restore:
153 to see the
1
Default Value
Do Not Restore
2
3
Select Menus > Option Card Menu > SCS/TNe MENU >
TN3270E SETUP > TEST OPTIONS > SCS3270 Defaults.
Recommended Value Comments
Your preferred Choose between Do Not Restore *,
defaults US-Default, or Non-US-Default
Scroll to the desired value. Touch Submit to save one of the
factory defaults.
Exit the menu by touching Home.
45