Keep Alive Time - Lexmark T656 User Manual

Keep Alive Time

Operations - TN3270E SETUP: NETWORK SETUP > SERVER INFO > Keep Alive Time
This Network Setup > Server Info option specifies the time in sec-
onds that expires between each keep alive signal sent to the host or
SNA gateway server. The
of signal sent to the host.
Set this option to a value smaller than the session's inactivity time-
out value defined on the host. The host parameter name is
KEEPALIVE OPTIONS. It resides in the host IP profile dataset:
SYS1.TCPPARMS(PROFILE)
This setting is not used if the
Option Value Comments
45 * [1..32000] The range is 1 to 32000 seconds.
Keep Alive Type setting specifies the type
.
Keep Alive Type is set to None.
103