Lexmark T656 User Manual page 18

Selecting a New Value as a
Understanding the Operator Panel: MFP Touch Screen
Several examples of how to use the operator panel to select and
store new values are shown below. The section
Value as a Setting" on page 20
two sections discuss slight differences.
User-selected default settings remain in effect until you save new
settings or restore the factory defaults. All saved options become
active on the next host session.
To select a new value
Setting
1
Navigate to the SCS/TNe MENU as explained in
Screen" on page
2
For this example, touch SCS/TNe MENU.
3
Now you will see a list of menus. Touch
to the desired item. In this example locate and touch
TN3270E SETUP.
4
Now you will see a list of menus. Touch
to the desired item. In this example locate and touch SCS
OPTIONS.
5
Now you will see a list of menus. Touch
to the desired item. In this example locate and touch MISC
SETTINGS.
shows all details, while the following
19.
"Selecting a New
"MFP Touch
or to scroll
or to scroll
or to scroll
20