Task 1 - Configuring The Host - Lexmark T656 User Manual

Configuring the
AS/400 and iSeries Installation Setup: Task 1 - Configuring the Host
Task 1 -
The host operating system must support TCP/IP and extended Tel-
net protocols to print SCS jobs to a LAN attached printer.
Host
Section
ware which supports these protocols.
To configure the host check and set the following three system
values.
System Value
QAUTOCFG
QAUTORMT
"AS/400 and iSeries Software" on page 279
Required Value
Controls the automatic configuration of devices.
Must be set to '1'
Sample commands:
DSPSYSVAL SYSVAL(QAUTOCFG)
CHGSYSVAL SYSVAL(QAUTOCFG) VALUE('1')
Controls the automatic configuration of remote
controllers.
Must be set to '1'
Sample commands:
DSPSYSVAL SYSVAL(QAUTORMT)
CHGSYSVAL SYSVAL(QAUTORMT) VALUE('1')
lists host soft-
56