Sap Support; Installing Sap Device Types; Modifying Device Types Format And Default Settings - Lexmark CS410 User Manual

SAP support

SAP support
When used in PCL 5 emulation mode, SAP ERP software has built‑in support for many of the functions provided by
Forms and Bar Code Card.
SAP systems support the following device types:
• LEXT622
•
LEXW820
•
ZLXFORM2

Installing SAP device types

Note: You must be the SAP Basis administrator to install SAP devices.
1
Start transaction SE38.
2
Execute report RSTXSCRP to load the device type ZLXFORM2.
3
Type the name of the device type in the Object Name field.
Note: Do not include the .pri extension.
4
Select IMPORT mode, and then press the F8 button (execute).
5
Reset the SAPscript cache:
a
Call transaction SE38.
b
Execute the report RSTXDELL, using client = '*'.
6
Reset the character code cache:
a
Start transaction SP12.
b
Click character sets > Conf buffer (CCC) > Invalidate CCC.
Note: The reset procedure is valid only on the actual instance, so you must connect on the instance where the spool
work process is running.
7
Restart the spool work process:
a
Highlight the spool work process SPO.
b
Click Process > cancel without core.
Note: The spool work process should automatically restart after a few seconds or on the next interrupt.

Modifying device types format and default settings

1
Start transaction SPAD.
2
Click Full Administration > Device Types.
3
Double‑click the device type.
4
Click Format, and then double‑click the format you want to modify.
5
Click Change.
10