Keep Alive Type - Lexmark T656 User Manual

Keep Alive Type

I :
MPORTANT
If the Mainframe has difficulty detecting the
selected signal type, try changing to another type.
Check with your system administrator to
determine the type of signal to select.
Operations - TN3270E SETUP: NETWORK SETUP > SERVER INFO > Keep Alive Type
This Network Setup > Server Info option specifies the type of keep
alive signal sent to the host or SNA gateway server. This signal is
sent to the host by the SCS/TNe Emulation to keep the Telnet ses-
sion active. The Keep Alive Time
signal is sent.
Check with your system administrator to determine the type of sig-
nal to select.
Option Value Comments
None Do not send keep alive signals. When this setting is
selected, the host should be configured to send a
keep alive signal. The SCS/TNe Emulation can
receive and respond to a Telnet NOP or a Timing
Mark keep alive signal.
Telnet NOP * Send a Telnet No Operation as the keep alive
signal.
Timing Mark Send a Telnet timing mark as the keep alive signal.
setting determines how often this
102