Lu Name - Lexmark T656 User Manual

I :
MPORTANT
An LU name must be specified in order for the
SCS/TNe Emulation to connect to the host or
SNA gateway.
Operations - TN3270E SETUP: NETWORK SETUP > SERVER INFO > LU Name

LU Name

This Network Setup > Server Info option specifies the LU name
assigned to the SCS/TNe Emulation on the host or SNA gateway.
Remember also to check the setting of the
specific LU name is requested, then the name must be defined and
available on the host.
After a connection is active, the LU name can be viewed with the
Connect Status
( "How to access the Menu Settings Page" on page
Check with your system administrator for the correct LU name to
use.
Option Value
[undefined] *
option or on the Menu Settings page
Comments
Any ASCII text string up to 10 characters.
Device Type option. If a
78).
100