Ppm Quality Dis (Idb Opt.126) - Lexmark T656 User Manual

PPM Quality Dis
This SCS Options > COR/APO Settings option controls the text
(IDB Opt.126)
mode used in the APO/COR function. In the APO/COR function, the
print quality parameter is used (text mode on/off) to disable/enable
computer output reduction mode.
To print in computer output reduction mode, the print quality must be
set to Data Processing (Text mode off). If "Letter Quality" or "Draft"
(Text mode on) is selected, the computer output reduction mode will
be disabled and the print job will be printed in Portrait orientation
(Text mode).
As it will not always be possible to control the print quality of the jobs
printed from the host, this option is used to disable text mode. When
text mode is disabled, the APO/COR function will ignore the print
quality parameter and print all print jobs fulfilling the requirements in
computer output reduction mode. Refer to "Appendix D - COR/APO
Logic (TN5250e)" on page 287
Operations - TN5250E SETUP: SCS OPTIONS > COR/APO SETTINGS > PPM Quality Dis (IDB Opt.126) 205