HP Z400 - Workstation Installation Manual page 5

Installing the media card reader in the computer
1. Install the media card reader into an optical drive bay.
2. Ensure that the adapter snaps securely into place.
Figure 4
Connecting the media card reader
NOTE: See the service label on the side access panel to locate connectors on the system board.
1. Connect the USB cable from the media card reader directly to a keyed, two-row, 9-pin USB
connector on the system board.
2. Ensure the USB cable connector is positioned correctly on the system board connector.
Figure 5 Connecting to the system board
ENWW
Installing the media card reader in the optical bay
Installing the media card reader 5