Lock & Unlock Device - Motorola MOTO Q global User Manual

Note: If you want to completely remove a program
from your device, from the home screen, press Start
> Settings > Remove Programs.
lock & unlock device
To prevent accidental keypresses, you can lock your
X
keypad: press , then
To keep others from using your device, you can set
a password and lock your device:
1 From the home screen, press Start > Settings
> Security > Device Lock
Tip: If you want your device to lock automatically
when you're not using it, check the Prompt if device
unused for checkbox, and choose the lock delay.
2 Choose a password type that is either simple
(4-digit number) or strong alphanumeric (a
hard-to-guess password with at least 7
f
.
characters, including uppercase and lowercase
letters, numerals, and punctuation).
Tip: Choose a password you will remember.
Without your password, you can reset your
device, but it will result in the loss of your
personalized settings and all content stored in
device memory. To perform a hard reset, hold
down the center key
turning the device on.
3 Enter and confirm your password.
4 Press Done.
To lock your device, press and hold
Quick List opens. Then, select Lock. Your left soft key
changes to Unlock.
To unlock your device, press Unlock and enter your
password. Your device uses * if you have not set a
password.
s
for 5 seconds while
X
until the
basics 25