2
Setting up the Hardware
This chapter provides information on setting up of the workstation hardware.
Quick setup
WARNING!
— Do not disable the power cord grounding plug. The grounding plug is an important safety feature.
— Plug the power cord in a grounded (earthed) outlet that is easily accessible at all times.
NOTE:
Your workstation might not have PS/2 mouse and keyboard connectors as shown in Figure
2–1. Alternatively, connect the mouse and keyboard to appropriate USB connectors (see Table 2–2).
Figure 2-1
Workstation quick setup example
NOTE:
After setting up your workstation hardware, connect other peripheral components (such as a
printer) according to the instructions included with the device. For more information on your HP
Workstation, see the Documentation and Diagnostics CD or visit
workstationsupport.
ENWW
To reduce the risk of electric shock or damage to your equipment:
http://www.hp.com/go/
Quick setup
7