Expansion Cards - HP xw3400 - Workstation Technical Reference Manual

Expansion cards

Prepare the workstation for disassembly
1.
Remove the access panel and rotate the workstation so the system board is parallel to the table to
2.
make it easier to work on
On the rear of the workstation, a sliding slot cover lock secures the expansion card brackets and
3.
expansion slot covers in place. Remove the captive thumbscrew that holds the slot cover lock in place
(1) and slide the slot cover lock up and off the chassis (2).
Before installing an expansion card, remove the expansion slot cover or the existing expansion card.
4.
ENWW
(Preparation for disassembly on page
(Access panel on page 61).
59).
Expansion cards 67