Fan Shroud - HP xw3400 - Workstation Technical Reference Manual
Hp xw3400 workstation - service and technical reference guide
Hide thumbs
Also See for xw3400 - Workstation:
- Installation manual (10 pages) ,
- Quick reference card (2 pages) ,
- Declaration of conformity (1 page)
Table of Contents
Advertisement
Fan shroud
Prepare the workstation for disassembly
1.
Remove the access panel and rotate the workstation so the system board is parallel to the table to
2.
make it easier to work on
Remove the hard drive cables from the plastic shroud at the front of the chassis and from the hard
3.
drives.
Lift the shroud straight up (1) about 5-mm (3/16-in) before pulling it into the chassis (2) to remove it.
4.
NOTE:
To install the shroud, reverse the removal process.
84
Chapter 7 Removal and replacement procedures
(Preparation for disassembly on page
(Access panel on page
61).
59).
ENWW
Advertisement
Table of Contents
