HP XM600 - Kayak - 128 MB RAM Technical Reference Manual page 81

HP 10/100 TX PCI LAN Interface Features
Feature:
RJ45 Connector
BootROM
Remote Power On (RPO)
Remote Wake Up (RWU)
Power Management
Manageability
Diagnostic
HP 10/100 TX PCI LAN Interface LED Descriptions
LED Description
Link integrity
10 LNK
Link integrity
100 LNK
Yellow:
ACT Port traffic for
either speed
Connection to Ethernet 10/100 TX autonegotiation
Protocols:
PxE 2.0,
•
On-board socket support up to 128 Kb.
•
Full remote power on using Magic Packet for Microsoft Windows 95,
Windows 98, Windows NT4 in APM mode.
Enable and Wake Up from Suspend state using Magic Packet and Pattern
Matching for Microsoft Win98SE and Win2000 in ACPI mode.
This feature enables a host computer to remotely (over the network) power
on computers and wake computers up from energy-saving Sleep mode. For
these features to work, use the Setup program to configure the BIOS.
OnNow 1.0,
•
Advanced Power Management 1.2,
•
PCI Power Management 1.1,
•
WfM 2.0 compliant, ACPI.
•
Desktop Management Interface (DMI) 2.0 Dynamic driver,
•
DMI 2.0 SNMP mapper,
•
PXE 2.0 Flashable BootROM (optional on socket).
•
Mac address DOS report tool,
•
User Diag for DOS.
•
Flashing
Reversed polarity Good 10 Base-T
connection between
NIC and hub.
Reversed polarity Good 100 TX
connection between
NIC and hub.
Network traffic Heavy network
present traffic
3 Interface Cards
Description:
Steady
No connection
between NIC and
hub
No connection
between NIC and
hub
No traffic
Network Cards
Off
81