If You Forgot The Administrator Password - HP XM600 - Kayak - 128 MB RAM Technical Reference Manual

Pc workstation
Hide thumbs Also See for XM600 - Kayak - 128 MB RAM:
Table of Contents

Advertisement

5 HP BIOS

If You Forgot the Administrator Password

If You Forgot the Administrator Password
1 Switch off the PC Workstation and remove the power cord.
2 Remove the PC Workstation's cover.
3 Set switch
9
on the system board switch block to the
4 Replace the power cord and restart the PC Workstation.
5 When the message Passwords have been cleared appears on screen,
switch off the PC Workstation.
6 Remove the power cord and reset switch
7 Replace the PC Workstation's cover.
8 Switch on the PC Workstation and allow it to complete its startup routine.
9 After the Power-On-Self-Test has completed, press F2 when prompted to
use the Setup program.
10 Set the Administrator and new User passwords.
11 Press Esc, or F3, or select Exit Menu, to save the new Password and
exit Setup.
110
ON
position.
9
back to the
OFF
position.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kayak xm600 series 2

Table of Contents