HP Workstation xw4100 User Manual page 33

6. The next screen will display the physical disks on the left and the proposed virtual disk (RAID array)
on the right as a preview of the proposed disk configuration. If changes are needed, press "Back"
to go back and change details of the configuration, or press "Accept" to accept the configuration.
On the next screen, press "Yes" to save the configuration, then press "Yes" to initialize the new
RAID array. If a disk in the RAID array fails or needs to be replaced for any reason, the WebBIOS
utility can be used to easily rebuild the RAID array. If a disk failure occurs, the change to the RAID
array will be indicated by a message on the screen before entering the utility.
Figure 6-13 Foreign configuration on LSI adapter
ENWW LSI 8344ELP and LSI 8888ELP Setup 29