HP Workstation xw4100 User Manual page 26

3. Press enter to select and configure the highlighted adapter from the list. The next screen will display
properties of the selected adapter. Information on the attached drives, any RAID arrays present,
and more advanced adapter properties is available.
Figure 6-3
4. To create, manage or delete a SAS RAID array, highlight RAID Properties and press enter. If an
array is presently configured on the controller, the "View Existing Array" will be present.
Figure 6-4
22 Chapter 6 Installing and configuring SAS hardware RAID
LSI Logic MPT Setup Utility – Adapter properties
Logic MPT Setup Utility – RAID properties
ENWW