WARNING
WARNING
preface
important warnings
avoiding electrical shocks
To avoid electrical shock, do not open the power supply. There
are no user-serviceable parts inside.
To avoid electrical shock and harm to your eyes by laser light, do
not open the laser module. The laser module should be serviced
by service personnel only. Do not attempt to make any
adjustment to the laser unit. Refer to the label on the CD-ROM
for power requirements and wavelength. This product is a class I
laser product.
removing and replacing the cover
For your safety, never remove the Workstation cover without
first disconnecting the power cord from the power outlet and
removing any connection to a telecommunications network. If a
Power Protection Device is fitted to your Workstation, you must
shut down your computer using its on/off switch, then remove
the power cord before removing the Workstation's cover. Remove
the Power Protection Device cables before any servicing
operation. Always replace the cover before switching the
Workstation on again.
9