HP Workstation x1100 Getting Started Manual page 44

Table 2-2
troubleshooting your workstation
solving hardware problems
Your Workstation Has a Hardware Problem
The keyboard doesn't work.
Make sure...
The keyboard cable is correctly
connected.
The keyboard is free of debris.
The keyboard itself is not
defective.
You are using the correct driver.
The correct driver is pre-installed
on all Windows NT 4.0 and
Windows 2000 preloaded systems.
For other operating systems, refer
to your operating system's
documentation.
You are using the latest BIOS.
If you are using a USB keyboard
connection, you must be using the
Windows 2000 operating system.
The monitor doesn't work.
The workstation's power indicator light works but the monitor
remains blank
Make sure...
The monitor is switched ON (LED
is on).
44
How
Plug the cable into the correct
connector on the back of the
workstation. Color coding is used
for easy matching.
Check all keys are at the same
height, and none are stuck down.
Either replace the keyboard by a
known working unit or try the
keyboard with another
workstation.
Download the latest driver from
HP's Web at:
www.hp.com/go/workstationsupport
Download the latest BIOS from
HP's Web at:
www.hp.com/go/workstationsupport
Currently, Windows NT does not
support the USB connection.
How
Refer to the monitor manual for
an explanation of the LED
signals (green, orange, or
blinking).
Chapter 2