HP VL600 - Vectra - 128 MB RAM Installation Manual page 18

Connecting to a Novell NetWare 4.11 Server
Microsoft Windows NT 4.0 Workstation
10 With "3Com Etherlink 10 ISA (3C509) Adapter" highlighted, click on
"OK".
11 With the "3Com Etherlink 10 ISA (3C509) Adapter" listed in the "Network
Adapters:" window, click on "Next".
12 Select all the applicable network protocols and click on "Next".
13 At the "Network Services:" prompt, accept the default settings and click
on "Next".
14 Complete the network card installation by clicking on "Next".
15 Type in the path to your Windows NT files and click "Continue".
16 Accept the "Type" as "ISA" and "Number" as "0" and click on "OK".
17 If TCPIP was one of the protocols selected, you will be prompted for some
TCPIP information. Your Network Administrator can provide you with
this information.
18 Accept the default entries at the "Show Bindings for:" windows and click
on "Next".
19 When "Windows NT is now ready to start the network..." window appears,
click on "Next".
20 Specify your Computer Name, Workgroup or Domain Name and click on
Next".
21 Click on "Finish" when the "Network has been installed on this computer"
message appears.
22 Remove the driver disk and select "No" when prompted to restart your
computer.
23 From the "Programs" menu, run the "3COM NIC DOCTOR". Make sure
that the current resources match the settings specified under the Device
Configuration section of this instruction.
24 After verifying the resources, reboot the system.
25 Log onto Windows NT Workstation with administrator privileges.
26 From the location of the "Novell Client v4.6 for Windows NT" installation
files, execute "Winsetup.exe".
27 Select the Language of Installation and click on it.
28 Click on "Windows NT Client".
16