Table of Contents
Advertisement
Removal and replacement procedures
Heat sink/fan assembly or heat sink
Description
Heat sink/fan assembly for models with discrete graphics subsystems (includes thermal material)
Heat sink for models with UMA graphics subsystems (includes thermal material)
✎
To properly ventilate the computer, allow at least a 7.6 cm (3 in) clearance on the left side of the computer. The
computer uses an electric fan for ventilation. The fan is controlled by a temperature sensor and is designed to
turn on automatically when high temperature conditions exist. These conditions are affected by high external
temperatures, system power consumption, power management/battery conservation configurations, battery fast
charging, and software requirements. Exhaust air is displaced through the ventilation grill located on the left side
of the computer.
Before removing the heat sink (for models with UMA graphics subsystems) or the heat sink/fan assembly (for
models with discrete graphics subsystems):
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first disconnecting the power cord from the AC outlet and then
disconnecting the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Hard drive (see
b. Memory module (see
c. RTC battery (see
d. WLAN module (see
e. Optical drive (see
f. Keyboard (see
g. Keyboard cover (see
h. Speaker assembly (see
i. Display assembly (see
j. Top cover (see
k. System board (see
4–52
"Battery" on page
"Hard drive" on page
4-8)
"Memory module" on page
"RTC battery" on page
"WLAN module" on page
"Optical drive" on page
"Keyboard" on page
4-21)
"Keyboard cover" on page
"Speaker assembly" on page
"Display assembly" on page
"Top cover" on page
4-35)
"System board" on page
4-7).
4-10)
4-12)
4-14)
4-20)
4-23)
4-25)
4-27)
4-48)
Spare part number
591956-001
591957-001
Maintenance and Service Guide
Advertisement
Table of Contents
