Speaker Assembly - Compaq Presario CQ41-200 - Notebook PC Maintenance And Service Manual

Speaker assembly

Description
All countries and regions except India
India
Before removing the speaker assembly:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first disconnecting the power cord from the AC outlet and then
disconnecting the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Hard drive cover (see
b. Mini Card compartment cover (see
c. Optical drive cover (see
d. Keyboard (see
e. Keyboard cover (see
Remove the speaker assembly:
1. Disconnect the speaker cable 1 from the system board.
2. Release the zero insertion force (ZIF) connector for the num lock cable 2 from the system board.
Maintenance and Service Guide
"Battery" on page
"Hard drive" on page
"RTC battery" on page
"Optical drive" on page
"Keyboard" on page 4-21)
"Keyboard cover" on page
4-7).
4-8)
4-12)
4-20)
4-23)
Removal and replacement procedures
Spare part number
486865-001
486865-D61
4–25