Fan/Heat Sink Assembly - Compaq Presario V3500 Maintenance And Service Manual

Fan/heat sink assembly

Description
Fan/heat sink assembly for use in computer models with AMD processors (includes thermal material) 455843-001
Fan/heat sink assembly for use in computer models with Intel processors (includes thermal material)
NOTE: To properly ventilate the computer, allow at least a 7.6-cm (3-inch) clearance on the right side
and rear panel of the computer. The computer uses an electric fan for ventilation. The fan is controlled by
a temperature sensor and is designed to turn on automatically when high temperature conditions exist.
These conditions are affected by high external temperatures, system power consumption, power
management/battery conservation configurations, battery fast charging, and software requirements.
Exhaust air is displaced through the ventilation grill located on the left side of the computer.
Before removing the fan/heat sink assembly, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
3.
then unplugging the AC adapter from the computer.
Remove the battery (see
4.
Remove the following components:
5.
Hard drive (see
a.
Optical drive (see
b.
Keyboard (see
c.
Switch cover (see
d.
Display assembly (see
e.
Top cover (see
f.
Wireless switch board (see
g.
Audio board (see
h.
Bluetooth module (see
i.
USB board (see
j.
System board (see
k.
100 Chapter 4 Removal and replacement procedures
Battery on page 53).
Hard drive on page 54)
Optical drive on page
Keyboard on page 66)
Switch cover on page
Display assembly on page
Top cover on page 80)
Wireless switch board on page
Audio board on page
Bluetooth module on page
USB board on page 90)
System board on page
64)
69)
71)
85)
88)
89)
95)
Spare part number
450096-001