Rear Panel Components; Installing The Rubber Feet - HP vc4820T - Thin Client Troubleshooting Manual

Rear Panel Components

For more information,
specific QuickSpecs.
Figure 1-5
(1) Ethernet RJ-45 connector
(2) Serial connectors (4)
(3) PS/2 connectors (2)
(4) Parallel connector

Installing the Rubber Feet

You may want to use your thin client in a horizontal orientation. You can install rubber feet on the left
side of the unit to help keep the unit safely in place.
To install the rubber feet:
1. Locate the VESA (Video Electronics Standards Association) holes in the left side of the thin client.
CAUTION:
and result in equipment damage.
2. Remove the feet from their backing.
4 Chapter 1 Product Description
http://www.hp.com
Rear panel components
If you use the thin client in a horizontal orientation without the rubber feet, it may slide
and search for your specific thin client model to find the model-
(5) Secure cable routing slot
(6) Universal serial bus (USB) connectors (2)
(7) VGA connector
(8) Power connector