Thin Client - HP T5145 - Thin Client - Tower Administrator's Manual

Thin Client

Use the Thin Client tab to change the Thin Client State.
Go to Settings > Thin Client to set the following options:
▲
●
Initial Thin Client State: From this menu you can select Local or Stateless mode. By default, the
thin client is in Local mode.
You can change this setting if you want to operate the unit in Stateless mode, which pulls the
user .xml profiles from an ftp server. In Stateless mode, all of the settings are stored on the network
and not locally.
●
Auto Detect Stateless Environment: Select to auto detect the stateless environment.
Local Login Options
●
Local Auto-Login: Select the option you want. By default, the unit automatically logs in as
Administrator.
NOTE:
appeared in the center of the screen, press and hold the left
●
Administrator Password: Click Set Password to change the current administrator password.
●
User Password: Click Set Password to change the current user's password.
20 Chapter 2 Installation
To interrupt an auto login during boot up: when the GUI has started and the HP logo has
Shift key.
ENWW