Hp Thinstate Utility - HP T5145 - Thin Client - Tower Administrator's Manual

Hp thinconnect, build s2st0070 administrator's guide

Hide thumbs Also See for T5145 - Thin Client - Tower:

User manual (340 pages)

Administrator's manual (86 pages)

Troubleshooting manual (73 pages)

Table Of Contents

Table of Contents

●

Altiris Server: Default port 190

●

Altiris Server Type: Set to IP or String. Default type = IP.

Select server type IP if the DHCP server is setup to use an IP address only.

Select type String if the DHCP server is setup to use hostname/dns and an IP address.

(example: myftpserver.com or 192.168.1.1)

NOTE:

●

Device Manager Groups: Default port 202

●

Device Manager Groups: Default port 203

NOTE:

You must create a shared folder on the FTP server.

Upon rebooting, the unit automatically looks for the FTP server, log in, go to the path, and update itself

with the newer image using the information provided by the DHCP options.

FTP

Use this window to configure automatic FTP updates as an alternative to Altiris Deployment Solution,

as follows.

●

Enable Automatic Update: Select to enable the thin client to check a specific FTP location for a

newer image or package upon reboot.

●

FTP Address: Type the IP address of the FTP server that houses the operating system image file

(i.e., 150.0.0.5).

●

FTP Location: Type the FTP server path.

●

FTP Port: By default, FTP uses port 21. HP recommends that you do not change this setting.

●

FTP Username: Type a valid user name on the server to authenticate the FTP process.

●

FTP Password: Click Set Password and type a valid password on the server to authenticate the

FTP process.

●

Click Close, and then Reboot on the Save Warning message.

After rebooting, using the information provided in the previous fields, the unit automatically looks for the

FTP server, logs in, goes to the specified path, and updates with the newer image.