HP T5145 - Thin Client - Tower Administrator's Manual page 52

c. Click Generate.
d. Click OK on the information message.
e. Close the hpthinstate customized settings dialog box.
6. Click Capture.
7. Click OK on the notification message.
8. Close the hpthinstate customized settings dialog box.
Deploy a Full Image from a Thin Client
To use HP ThinState to deploy a full image from a Thin Client:
1. On the thin client from which you want to deploy a captured full image, click Settings >
Management, and click Replicate Settings by using HP ThinState.
2. Click OK on the warning message. The following window is displayed.
3. Select Capture Full Image.
46 Chapter 2 Installation ENWW