Using The Audio Wizard In The Sound Effect Manager (Type 6 Connectors) - HP s7600n - Pavilion Media Center Getting Started Manual

To enable the Audio Wizard
Make sure the Enable Auto Detection check box
is selected to enable the wizard. Click OK to close
the window.

Using the Audio Wizard in the Sound Effect Manager (type 6 connectors)

The Sound Effect Manager Audio Wizard can help
you connect front-panel audio.
To use the Audio Wizard:
1
Turn on the PC.
2
Click Start on the taskbar.
3
Choose Control Panel.
4
Click Sounds, Speech and Audio
Devices (or Sounds and Audio Devices).
5
Click Sound Effect Manager. The window
opens.
6
Click Audio Wizard. A window opens
that shows the connector panel on the front
of the PC.
7
Place a check in the Enable jack detection
check box to enable the wizard.
8
Connect the speaker system audio cable plugs
into the connectors on the front of your PC.
The panel display highlights a cable that is
properly inserted in a connector.
9
Close the window.
Configuring Speaker and Sound Options
51