Formatting A Memory Card; Using The Memory Card Reader; Understanding The Activity Light - HP s7600n - Pavilion Media Center Getting Started Manual

Formatting a memory card

If you have not used the memory card before or the
card has become corrupted, you may need to
format it before using it:
1
Format your memory card in your digital
camera. Follow the instructions that came with
your digital camera.
Or
Insert the media into the correct card slot on
the reader until it stops and locks into place.
The light on the reader lights, and the
computer automatically detects the media.
2
Click Start, and then click My Computer.

Using the memory card reader

1
Insert the media into the card slot until it stops.
The activity light (A) on the memory card
reader lights, and the PC automatically detects
the media.
2
An Autoplay window opens. Select a program
to access your files. The PC opens a program
so you can access the media contents. You
can copy files from or to the media.
Or

Understanding the activity light

The memory card reader activity light is off when
there are no media cards plugged into the four slots.
The light turns on when a media card is inserted into
a slot. The light blinks when data is being
transferred between the card and the PC.
3
Under Devices with Removable Storage,
right-click the correct memory card icon.
4
Select Format, and then type a label name
into the label field. For best compatibility,
select FAT as the file system settings.
5
Click Start.
6
Click OK on the Format Complete window,
and then click Close.
If the Autoplay window does not open, you
can click Start, click My Computer, and
then double-click the memory card icon to
display the files on the memory card.
3
When you are finished, right-click the drive
icon, select Eject, check that the activity light
is on but not blinking, and then remove the
media. A steady light indicates that the PC is
not reading or writing the media.
n
Some memory cards
have a lock position.
To view or edit your
photos, make sure
the memory card is in
the unlocked position.
w
Do not try to remove
media when the in-
use light is blinking.
Doing so may cause
loss of data.
n
Media must be
inserted correctly.
Note the direction of
the notched corner on
the media. See the
"Memory Insertion
Guide" on page 72.
CompactFlash and
Microdrive are keyed
and cannot be
inserted incorrectly.
Insert the receptacle
edge (holes) of this
media into the slot.
Using the PC Hardware
71