Using The Gui: Multiple-Host Installations; Selecting Remote Hosts Or Groups; Select Installation (Host(S) Screen - Remote - HP Rx2620-2 - Integrity - 0 MB RAM User Manual

(including errors) for each component installed. The installation log files are located in
subdirectories named according to the IP address of each host in the \CPQSYSTEM\log
subdirectory on the boot partition of the local host. The directory containing the local host
information is stored in \CPQSYSTEM\log\localhost, instead of in the IP address.

Using the GUI: multiple-host installations

HP Smart Update Manager provides an easy-to-use graphical interface that enables you to deploy
and maintain firmware and software components. To access the HP Smart Update Manager, see
"First-time installations" (page
The Inventory Progress screen appears while HP Smart Update Manager builds an inventory of
available updates. When the inventory process is complete, the Select Installation Host(s) screen
appears.

Selecting remote hosts or groups

Figure 2-10 Select Installation (Host(s) Screen – Remote
The Select Installation Host(s) screen enables you to choose multiple groups and hosts for
component installation.
NOTE:
Local hosts cannot be included in a list with remote hosts or in a group.
To add hosts, see
To continue with the deployment process:
1. 1. Select one or more hosts or groups.
12).
"Managing hosts" (page 22). To add groups, see
Using the GUI: multiple-host installations
"Managing groups" (page 23).
21