Configuration/Setup Utility Menu - IBM Netvista A20i User Manual

This chapter includes information about updating configuration settings. Your IBM Personal
Computer is already configured for immediate use. You can view your computer's configuration
settings using the Configuration/Setup Utility. The Configuration/Setup Utility lets you view and
change important information about your computer and its hardware.The Configuration/Setup
Utility menu appears immediately after you press F1.

Configuration/Setup Utility menu

Note: The Configuration/Setup Utility menu that you see on your computer may look slightly
different from the menu shown here, but the options will operate just the same.
The Configuration/Setup Utility menu lists system configuration options. When you select one of
these options, a menu for that option appears.
The following table lists specific keys on the keyboard that will help you move through the Setup
menus.
Keys Function
↑ ↓
← →
F10
Enter
Esc
F2
+ -
Note: Not all of the above keys are available on every menu. The available keys in a menu
appear on the bottom of that menu.
Configuration/Setup Utility
Select option:
System Summary
Product Data
Devices and I/O Ports
Start Options
Date and Time
Advanced Setup
Power Management Setup
Frequency Control
Load FDDless Defaults
Load Optimized Defaults
Set Administrator Password
Set User Password
Save & Exit Setup
Exit Without Saving
Move Enter:select F2:General Help
Esc:Exit
F10:Save
Use these arrow keys to highlight an option in a menu. (Press the Enter key to choose
the option.)
Use these arrow keys to change the value of a setting. In some menus, you can use
these keys to move from one field to another.
Press this key to save your changes.
Press this key to select a highlighted option from a menu.
After viewing or making changes to the settings on a menu, press this
key to exit from the menu.
Press this key if you want help for a selected item in a menu.
Use the + and - keys to change the value in the Date and Time setting
menu.
37